Herschel IR Power 4
Size Guide 1
Watts | Panel Size cm | Heated Area |
---|---|---|
2600 | 75 x 40 | 21 m2 |
Herschel Advantage IR Power 4 Far Infrared Heater
£899.00 plus VAT
Industrial Heater
The challenge of heating Industrial units is how to adequately heat the work area without high purchase and installation costs, excessive wastage and high ongoing maintenance costs. Traditional Gas solutions fail this challenge in every respect and traditional electric solutions are expensive to run and some produce unwanted red light.
The Herschel Advantage IRP4 revolutionises the industrial heating market: beating every other competitor in each of the above areas. It is competitively priced; easy to install; low maintenance. The IRP4 provides greater warmth at less cost than the competition and emits no light. This is why industrial units, workshops, assembly areas and loading bays around the world are turning to the Herschel Advantage as the system of choice for reliable, cost-effective and failsafe heating.
Size Guide
- Description
- Additional information
- Reviews (0)
- Tech Spec & Technical Datasheets
Description
The Advantage IRP4 Industrial heater consists of 4 high-emission ceramic heating elements mounted in a directional reflective unit. It is designed to gently warm people indoors using infrared radiated heat. Infrared heat is emitted from the hot surface of the ceramic heaters and warms the body directly without heating the air in between. As soon as the heater is switched on the ceramic elements start to warm up and full operating temperature is achieved in less than 10 minutes. As the energy produced is all in the low medium to far infrared region (not visible), there is no light emitted from the heater, but elements can produce a very faint orange glow.
The Herschel IR must be located in a position to allow for proper and efficient use but one that ensures hot parts are not touched accidentally. The unit is designed to be mounted or suspended from a ceiling. The recommended height for the mounting is 2.8m to 3.5m (137”-158”) from ground level and a minimum 125mm from the ceiling and 1.5m from the nearest wall. The heating elements are at a fixed downward angle to ensure maximum heat arc from this installation height. The Herschel IRP4 MUST NOT be installed at a height of less than 2.8m (137”). Consideration should be given to any temporary or occasional additions such as stages or platforms, and the height should be adjusted accordingly. The Herschel IRP4 should be firmly and permanently attached to the ceiling directly via its own brackets or via appropriate suspension cables.
Functional Description
We recommend the Advantage IRP4 Heater for Industrial and Workshop space heating applications. This ceiling-mounted unit is designed for spaces providing adequate clearance from the ground (2.8 – 3.5m) and from the ceiling above (minimum 125mm) and from the nearest wall (minimum 1.5m). With input power requirements of 2600 watts, these low watt-density heaters give a far higher equivalent heat output compared with hot air or gas-burning “space ray” type heating systems or other forms of electric heating often used in these environments. There are additional benefits:
As there are no exhaust emissions there is no requirement for planning;
They operate silently and without fumes – consequently raising no health and safety issues;
Installation is much cheaper than oil or gas alternatives – all you require is electric cable;
No maintenance. You do not have to maintain an infrared heater once installed;
You can “focus” the heat exactly to where you want it – because there is no convection of heat, none is wasted blowing into areas it is not wanted;
Far Infrared has been shown to have positive effects on metabolism, being the waveband at which water (80% constituent of skin) most effectively absorbs heat.
Space heating can be used anywhere there is a requirement to heat a large volume and where the heaters themselves can be placed well out of reach. So workplaces like workshops, industrial or commercial units, warehouses etc make ideal locations for heaters of this sort.

TECHNICAL DETAILS


Additional information
Colour | Black, White |
---|
Be the first to review “Herschel Advantage IR Power 4 Far Infrared Heater”
Element: 4 x White glazed ceramic longwave Infrared emitters (3-10 microns)
Body: Stainless Steel body with protective grill.
Voltage: 230V, 50 Hz
Protection: IP rating IP20
Guarantee: 5 years
Heated Zone: 21m2
The heater will directly warm people and objects within the Heated Zone (note: air movement may reduce area coverage). Within enclosed areas the thermal mass of the building will also be heated. This will increase the ambient temperature and dependent upon the property age/type and insulation, may increase the effective heated area by up to 100%. For larger commercial projects or where different mounting heights are required we would always recommend Herschel carry out a survey or detailed desktop assessment.
Reviews
There are no reviews yet.